Tuesday 23 June 2015

Q:- Weld decay begins to occure


  • Imidetly after the welding
  • After post wel heat treatment
  • Faster in low carbon grades
  • Slower in low carbon grades

Friday 19 June 2015

CWI Training Exam in Chennai

AWS CWI Training Exam in Chennai



Eurotech has announced its 6 Days Training and 1 day Exam program of AWS-CWI, CAWI, SCWI, CWE certification for the Chennai location.


This is your chance to become Certified as one of the following: 


  • Certified Welding Inspector (CWI) 
  • Certified Associate Welding Inspector (CAWI) 
  • Senior Certified Welding Inspector (SCWI) 
  • Certified Welding Educator (CWE)


So you want to be a certified welding inspector? If you want to Become Certified Welding Inspector. You Can share your E-mail and Mobile No. in comments. so that i can send you some details of AWS CWI.

Interested Candidates Can write or call Us for More Information 
Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com 
Please Promote us, forward to your friends circles..... 

Monday 15 June 2015

Q:- E Size and number of tack weld are


  • An important consideration 
  • They are depend on the thickness and base material being welded 
  • For some material preheat may have to be used 
  • All of the above


Saturday 13 June 2015

Thursday 4 June 2015

Monday 25 May 2015

AWS CWI TRAINING SCHEDULE AHMEDABAD 2015




EUROTECH AWS CWI SCHEDULE AHMEDABAD 2015, INDIA
SR.NOSITE CODEMONTHSEMINAR DATESEXAM DATECITY
1IN44315JULY22nd TO 27th JULY28th JULYAHMEDABAD
2IN44815SEPTEMBER7th TO 12th SEPT13th SEPTAHMEDABAD
3IN45315DECEMBER4th DEC TO 9th DEC10th DECAHMEDABAD


Dear Welding Professionals,

We are delighted to inform you that Eurotech one of the leading welding training providers in India has announce its training schedule of AWS-CWI for Ahmedabad, 2015. We at Eurotech provide 6 days Training and 1 day Exam of AWS-CWI in India.

You can register for the course on Eurotech website 

Click Here To Register AWS CWI Certified welding inspector AHMEDABAD JULY 2015
Click Here To Register  AWS CWI Certified welding inspector AHMEDABAD SEPT 2015
Click Here To Register  AWS CWI Certified welding inspector AHMEDABAD  DEC  2015

You can also write or call us to assist on the below email id and contact no.

 Puneet Sharma | Call : 08196980555 |  E-Mail : aws.cwi.training@gmail.com 

Q:-The welder has increased electrode stick out length of the SAW set, what would be the effect on the weld

Tuesday 12 May 2015

AWS CWI Training Course in Coimbatore

AWS CWI Training seminar In Coimbatore May 2015
AWS CWI Training seminar In Coimbatore May 2015

Dear All Welding Engineers we wish to inform you that your Best chance to Become a Certified Welding Inspector (CWI), Eurotech organizing 6 Day AWS CWI Training Seminar In Coimbatore 

Location: Coimbatore, India 

Start Date: May 25, 2015 
End Date: May 31, 2015 

Interested Candidates Can Contact Us:  Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com 
Please promote us,please forward to your friends circles..

Q:- One the advantages of ultrasonic inspection in relation to radiographic testing to

  • Access is generally only required from one side (surface)of the component being tested 
  • The designated work area must be closed off by barriers, therefore safety is increased 
  • This materials can be easily examined 
  • A permanent image of the defect can be obtained

Friday 8 May 2015

Q:- For the structure termed martensitic to form in a c-mn steel it must first be heated to just below a critical temperature and rapidly cooled

  • Just below its lower critical temperature and rapidly cooled 
  • A maximum temperature of 550*C then rapidly cooled 
  • Above its upper critical temperature and slowly furnace cooled 
  • A full transformation to austenite then rapidly cooled

Wednesday 6 May 2015

Tuesday 5 May 2015

Q:- Why is it essential to clean the surrounding parent metal adjacent to the weld metal made by MMA(SMAW)which is to be ultrasonically tested?

  • Sound waves will not travel though paint 
  • Remove any rust 
  • The spatter will impede the contact of the probe and the parent material surface 
  • Spatter will reflect the back will echo signal and give spurious indications

Q:- Clustered porosity found internally in the body other open cf an MMA welding is usually associated with

  • Poor inter pass cleaning 
  • The open circuit current being too high 
  • Poor stop/start technique or damp electrode coating 
  • Low open circuit voltage

Monday 4 May 2015

Q:- You find out that contractor have carried out RT as the 10% contractual percentage required by the specification code. The specification also insists that an additional 2 weld, radiographed for every weld that is failed. One of the pipe's spools had an au acceptable defect which the contractor has ignored and radiographed another weld in its place which is acceptable, what would be your course of action be?

  1. As long as the other radiograph butt weld is acceptable it's ok, as the 10% condition percentage required by the specification code has been satisfied
  2. This is usual practice as 10% NDT is really not important
  3. Review the original failed weld and insist they have the additional 2 welds radiographed
  4. Review the original have it failed weld and repaired , radiographed , then I would insist that they have an additional 2 weld radiographed

Friday 1 May 2015

Q:- Some codes require the excess weld metal (weld cap) on cross weld joint tensile specimens to be flush ground, this is because:

  • Flushed caps will always break in the weld metal area 
  • This is to remove any porosity in the excess weld metal (weld cap) 
  • It is easier to calculate the cross section areas of the joint when fused 
  • Flushed caps have fuser stress raisers and therefore give a more aqua rate result

Wednesday 29 April 2015

Q:- With the DPI method of inspection, after the contact time as elapsed the dye should


  • Spraying the surface with the remover till all dye as gone then wipe with a clean cloth 
  • Spraying with developer then wiping with a cloth 
  • Wipe clean, using lint free cloth soaked in a solvent remover 
  • It does not matter how it is done as long as all traces of dye are removed.

Monday 27 April 2015

AWS CWI TRAINING SCHEDULE NEW DELHI 2015

                       

EUROTECH AWS CWI SCHEDULE Delhi 2015, INDIA
SR.NOSITE CODEMONTHSEMINAR DATESEXAM DATECITY
1IN44315FEBUARY6th TO 11th FEB12th FEBDelhi
2IN44815MAY9th TO 14th MAY15th MAYDelhi
3IN45315AUGUST14th TO 19th AUGUST20th AUGUSTDelhi
4IN45715NOVEMBER15th TO 20th JUNE9th JULYDelhi


Dear Welding Professionals,

We at Eurotech are delighted to inform you that Eurotech has announced its 6 days Training and 1 Day Exam schedule for 2015 New Delhi location. Anyone who want to achieve greater heights in his welding career, then AWS-CWI certification is the ultimate opportunity in achieving those goals.

You can register for the course on Eurotech website 


You can also write or call us to assist on the below email id and contact no.

 Puneet Sharma | Call : 08196980555 |  E-Mail : aws.cwi.training@gmail.com  

Sunday 26 April 2015

Q:- Would you consider using a 5mm electrode for vertical up root runs in a 6G (HL045) fixed position pipe?

  1. Yes ,it is compatibility 
  2. Yes but this would depend upon the welder skill 
  3. No, it is not the most suitable electrode coating type 
  4. No, the electrode should have been smaller in diameter

Wednesday 22 April 2015

Q:- Asymmetrical weld symbols to EN 22553 are:

  1. The same side of the arrow 
  2. Different each side of the arrow 
  3. Show fillet weld only 
  4. Show butt weld only

Tuesday 21 April 2015

Friday 17 April 2015

AWS CWI Seminar & Exam In Mumbai

AWS Certified Welding Inspector Course in Mumbai


The American Welding Society CWI Training Seminar and Exam are coming to Mumbai on April 24, 2015 . Provided by Eurotech AWS Agent


This is your chance to take your welding career to the next level.


If you are interested to attend our AWS CWI 6 Day Preparatory Seminar and One day Exam program, you can write or call me to assist you.

Thanks & Regards,

Puneet Sharma

Mobile no. +918196980555

E-mail: aws.cwi.training@gmail.com

Eurotech ACS Pvt. Ltd
.


Monday 13 April 2015

AWS CWI Training Schedule Mumbai 2015



EUROTECH AWS CWI SCHEDULE Mumbai, INDIA
SR.NOSITE CODEMONTHSEMINAR DATESEXAM DATECITY
1IN44215JANUARY16th JAN TO 21st JAN22nd JANMumbai
2IN44715APRIL24th TO 29th APRIL30th APRILMumbai
3IN45015JUNE25th TO 30th MAY21st JUNEMumbai
4IN45115JULY15th TO 20th JUNE9th JULYMumbai
5IN45615OCTOBER12th TO 17th OCT18th OCTMumbai

Dear Welding Professionals 
  
Eurotech India American Welding Society Agent Now Released AWS CWI Certified Welding Inspector Training and certification Preparatory, Seminar & Exam program Schedule in  Mumbai, Maharashtra India 2015  
  
Call : 08196980555 E-Mail : aws.cwi.training@gmail.com , SEO@eurotechworld.net

Wednesday 8 April 2015

Basic Metallurgy Courses for Welding & Fabricating Professionals





Eurotech Organizing 2 days "Metallurgy" Course is very beneficial for Welding and Fabrication professionals as it would results in increasing your efficiency. The course objectives are: metals and their properties, to check material test certificate, heat treatment process, Destructive testing, Stainless steel and types, and many more. 
It will definitely increase your learning and your work efficiency and boost your career in welding  
Please do not hesitate to contact me if you require further information Metallurgy" Course 

Best Regards, 
Puneet Sharma 
Mobile no. 08196980555

Saturday 4 April 2015

Q:-Half life is a trem used to describe?


  1. The penetrating ability of a gamma ray source
  2. Half the time the gamma source will be use full
  3. The time taken of the gamma source to reduce the strength by half
  4. Time of decay of an X ray tube