Wednesday 27 July 2016

Interview Questions and Answers | Welding Interview Questions

Interview Questions and Answers | Welding Interview Questions

Q:- What is the standard for Process (or) Plant piping systems?
Answer: ASME B 31.3

Q:- What is the standard for Power Piping systems?
Answer: ASME B 31.1

Q:- What is the standard for liquid Petroleum Transportation piping systems?
Answer: ASME B31.4

Q:- What is the standard for Gas Transmission and Distribution piping systems?
Answer: ASME B31.8

Q:- What is the Code for Welding of Pipelines and Related facilities?
Answer: API 1104

Q:- What is the standard for welding rods Electrodes and filler metals?
Answer: ASME Sec-IIC

Q:- What is the standard for Non-destructive Examination?
Answer: ASME Sec-V

Q:- What is the standard for welding and Brazing Qualifications?
Answer: ASME Sec-IX

Q:- Which type of process we are using in field/fabrication shop?
Answer: Fusion welding

Q:- What is the specification/classification for carbon steel filler wire?
Answer: AWS 5.18/ER70-Sx

Q:- What is the specification/classification for carbon steel Electrode?
Answer: AWS 5.1/E-XXXX

Q:- Where we can use E-6010 type electrode?
Answer: we can use at root pass for deep penetration

Q:- What is the meaning for ASME?
Answer: American Society for Mechanical Engineering

Q:- Which type of electrode we are using in GTAW process?
Answer: Non-Consumable Tungston Electrode

Q:- How Many times we can dry the electrodes?
Answer: Only one time

Q:- Why we are baking the electrodes?
Answer: To remove the moisture content from the Electrodes.

Q:- What is the standard for Structural steel fabrication?
Answer: AWS D1.1

Q:- What is the standard for Welding symbols?
Answer: AWS A2.4.

Q:- What is the hydrotest pressure?
Answer: 1.5 Times of design pressure.

Q:- What is the drying temperature for Stainless Steel electrodes?
Answer: 120 to 250 degree temperature.

Q:- What is the drying procedure procedure for Low hydrogen electrodes?
Answer: 260 to 430 degree temperature.baking for two hours 

Q:- What are the defects we can find in visual Inspection?
Answer: Porosity,Undercut,Surface crack (HIC),Side wall fusion on fusion boundary.

Q:- What is the Procedure for Fit-Up inspection?
Answer: Base metal classification,cleaning,Alignment,root gap,root face,bevel angle & mismatch (or) overlap.

Q:- What is the internal overlap (or) mismatch for piping?
Answer: 1.5 mm.

Q:- How much root face are allowed?
Answer: As per WPS (or) 0.8 to 1.6 mm

Q:- What is meaning for F - Number?
Answer: F- is filler metal grouping Number.

Q:- What is meaning for P - Number?
Answer: P - is base metal grouping Number.

Q:- What is meaning for A - Number?
Answer: A - is electrode chemical analysis number.

Q:- How much bead width we can allow?
Answer: Max 3 times of electrode diameter.

Q:- How much area is required for Pre-heat?
Answer: 75 mm minimum from both end of the Joint.

Q:- Which section we are using for NDT?
Answer: ASME Sec-V

Q:- What are the essential variables for SMAW process?
Answer: In base metal thickness, P-number, dia of pipe, pre, post weld heat treatment
In filler metals F,A-numbers, dia 

Q:- What are the essential variables for GTAW process?
Answer: In Base Metal thickness, P-number, dia of pipe, pre, post weld heat treatment... In Filler Metals F, A-numbers,dia of filler metal

Q:- If welder made test by 2’’ dia, what is his range qualified?
Answer: He has qualified 1’’-dia and above.

Q:- If welder made test by 14 mm thickness, what is his thickness range qualified?
Answer: He has qualified unlimited thickness.

Q:- What is carbon % in low carbon steel?
Answer: Max 0.30 %

Q:- What is the interpass temperature for carbon steel materials?
Answer: Max 315’C

Q:- What is meaning for SAES,SAEP and SAMSS?
Answer: Saudi Aramco Engineering Standards
Saudi Aramco Engineering Procedures
Saudi Aramco Materials System Specification.

Q:- How much under cut depth allowed in piping?
Answer: 0.8 mm

Q:- How much area is required for Pre-heat?
Answer: 75 mm minimum from both end of the Joint.

Q:- How much percentage is allowed more than test pressure in Pressure relief device?
Answer: Test pressure plus10% (10% should be lesser than 50Psi).

Q:- How much gap is allowed in socket weld?
Answer: 1.5 mm minimum before welding.

Q:- What is the minimum fillet size in socket weld?
Answer: Minimum 3 mm fillet size.
Q:- Hydro test.
1. Piping Internal Cleaning
a. Air compressor
b. Air blower
c. Electrical cable
d. Generator
c. Wire brush
d. cotton waste cloth
e. water tanker water with pump
2. Testing
a. Pressure gauge-(30days calibration valid, range 1.5 to 2 times test pressure)
b. Test manifold (calibration validity)
c. Pressure relief valve( Set to 5% above test pressure)
d. Test pump
e. Water tank
f. Hoses
g. Test blind
h. Test water (refer as per project specification)
II. Test package 
1. Calibration Certificates of Gauges ,relief valves
2. P&ID and ISO Drawing
3. Test Package Control sheet
4. Marked up P&ID
5. As built Drawing
6. Welding log
7. NDE report
8 .Punch list –all punch list cleared (category one)
9. Pressure test Check sheet
10. Safety check lists

Take Free Practice Test AWS CWI

If you are Interested to attend our AWS CWI Seminar, Please Fill the Enquiry Form:

Tuesday 26 July 2016

AWS Certified Welding Inspector Certification Chennai

Attend Our AWS CWI Semminar in Chennai

AWS CWI | Certified Welding Inspector Certification | Chennai, Tamil Nadu, India

AWS CWI Certification, AWS CWI Seminar, AWS CWI Training, CWI Training, Certified welding inspector training, Certified Welding Inspector Exam, AWS Certified Welding Inspector Certification, certified welding inspector seminar, AWS CWI - Official Seminar 6 Day Authorized Seminar Chennai Tamil Nadu
Eurotech offer 7 days of intensive Certified Welding Inspector Certification Seminar that will help prepare you to pass the AWS certification tests. Our experienced instructors will help you learn the material you need to know fast, and show you how to use and understand the latest standards.

AWS CWI - Official Seminar 6 Day Authorized Seminar Chennai 2016

AWS CWI Course Details:

Welding Inspection Technology Workshop - 3 DAYS

Helps prepare you for the CWI/CWE Exam (Part A) The Welding Inspection Technology Workshop is packed with information on nondestructive examination methods applicable to common welding processes. It will assist welding inspectors and welding educators with knowledge of welding and inspection fundamentals useful on the jobsite. In addition, this seminar will prepare examination candidates for Part A (Fundamentals) of the Certified Welding Inspector examination.

Visual Inspection Workshop (1.5 Day)

Helps prepare you for the CWI/CWE Exam (Part B) This workshop provides hands-on training in the use of weld measurement tools and plastic weld replicas to determine the sizes of various weld discontinuities. Students will compare what they find to the criteria in a sample codebook to determine the acceptability or rejection criteria of the sample weld ments. The workshop also includes a sample practical examination to prepare test candidates for Part B (Practical Applications) of the Certified Welding Inspector examination. By attending this workshop, you can learn: Use of inspection tools. How to ensure compliance with the applicable code. Dos and don’ts of documentation. When a discontinuity is acceptable. When a discontinuity can be rejected. Why visual inspection can be the most effective NDE technique.

API 1104 Code Clinic ( 1.5 DAY)

Helps prepare you for the Certified Welding Inspector Exam (Part C) if you are testing to API 1104 This four-hour course covers general provisions of API 1104, including qualification of welding procedures for welds containing filler-metal additions, design and preparation of the joint for production welding, nondestructive testing and acceptance standards, and automatic welding with and without filler-metal additions. Candidates will be given the Course material for training before the workshop and are supposed to come with a thorough reading in the class.

Benefits of AWS CWI Certification:

- Official Course for AWS Certified Welding Inspector Certification
- 6 Days Intensive Training
- Includes Basic NDT Techniques and Welding Techniques
- Results in Deeper Understanding of Welding Quality

Top Searches related to AWS CWI Certification

aws cwi exam questions                                 aws cwi jobs
aws cwi exam results                                       aws cwi certification exam study materials
aws cwi practice test                                        aws cwi results
aws cwi renewal                                                 aws cwi exam questions pdf

 

If you have any questions, please feel free to ask!

Mr.Puneet Sharma | Call: +91- 8196980555 | E-mail: aws.cwi.training@gmail.com

If you want to Attend AWS CWI Seminar, Please fill out the Enquiry Form


Thursday 7 July 2016

Q:- Atmospheres for shielding an arc may consist of:


1. Inert gases, active gases, or mixtures of inert and active gases 
2. Only inert gases are permitted 
3. Only active gases are permitted 
4. No gases are permitted for welding
5. none of the above