Thursday, 31 December 2015

Q:- A STAR test is carried out to determine which of the following?

(A). A quick indication of weld quality for welder qualification test
(B). The test result can be used to verify that the material has not been adversely mechanically damaged by the heat during welding
(C). An indication of material elongation properties 
(D). An indication of through thickness ductility (in the Z direction)

Wednesday, 30 December 2015

Q:- Prior to production welding commencing you notice that the drawing has been revised and now Includes a pipe with a wall thickness of 36mm, your WPS only covers wall thickness of 28mm, what course of action would you follow?

A. Continuous with production welding as the difference is less than 10%
B. Apply for a concession to change the thickness to permit the welding on the 36mm wall thick pipe
C. Change the range on the WPS to 36mm and allow welding to commence
D. Allowing welding to commence then apply for a concession

Tuesday, 22 December 2015

Thursday, 17 December 2015

Q:-Most metals expand when heated, the change in length is expressed as :

(a) Thermal conductivity.

(b) Modulus of elasticity.

(c) Coefficient.

(d) Yielding.

AWS CWI Seminar Chennai


Eurotech offer seven days of intensive CWI training that will help prepare you to pass the CWI certification tests. AWS CWI (American Welding Society - Certified Welding Inspector) course and exam will be performed on 18-24 December 2015 in Chennai India.

Course Description
  • Welding Inspection Technology Workshop - 3 DAYS
  • Visual Inspection Workshop( 1.5 Day)
  • API 1104 Code Clinic( 1.5 DAY)
Course Benefits:
  • Official Course for AWS CWI Certification
  • 6 Days Intensive Training
  • Includes Basic NDT Techniques and Welding Techniques
  • Results in Deeper Understanding of Welding Quality
Contact us by email or phone about the course. Puneet Sharma Email  id: aws.cwi.training@gmail.com +91-8196980555

Click Here To Read AWS CWI Exam Preparation Blog For India, Chennai, Mumbai, Ahmedabad, New Delhi

Wednesday, 16 December 2015

Q:- Which of the following statements is true :



(a) Oxygen-fuel gas cutting is essentially an oxidization thermal cutting Process.

(b) Oxygen-fuel gas cutting is essentially a melting process.

(c) The only fuel gas used is acetylene.

(d) Propane is the preferred fuel gas in oxygen-fuel gas cutting as it produces Hotter flame.

Tuesday, 15 December 2015

Q:- Three essential factors for producing fusion weld are melting, removal of surface oxide from the joint surfaces and elimination of atmosphere from the region of the arc. Name the fourth one :



(a) The weld must be free from stress.

(b) The filler material must match that of the weld.

(c) The completed joint must at lease match the mechanical properties.

(d) An arc for a heat surface.

Monday, 14 December 2015

Q:- Which one of the following statements is false :



(a) Surface breaking defects are usually more detrimental to a weld in Comparison with sub-surface defects.

(b) The HAZ's of a steel weld usually have a higher tensile strength than The weld metal.

(c) Lameller tearing may occur within the fusion zone of large fillet welds.

(d) PWHT may stress relieve.

Sunday, 13 December 2015

Q:- What is the possible cause of too mush restraint of the parent material during welding :

(a) Restraint is always desirable.

(b) It may lead to cracking, especially with small welds between large components.

(c) It will cause too much distortion.

(d) It will cause lamellar tearing if it is present on a corner joint.

Friday, 11 December 2015

Q:-A martensite grain structure :

(a) Is always present in welds on steel.

(b) Is brittle grain structure .

(c) Is obtained when the preheat temperature exceeds 200*c

Wednesday, 9 December 2015

AWS CWI Training Chennai India



Eurotech offer 6 days of intensive CWI (Certified Welding Inspector) training and 1 day Exam that will help prepare you to pass the AWS CWI certification tests. Our experienced instructors will help you learn the material you need to know fast, and show you how to use and understand the latest standards.
This is your chance to become Certified as one of the following:



Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com
We kindly request you all to Share this post ..

Q:-High Phosphorous contents in carbon steels may cause :

(a) Cold shortness.

(b) Hot shortness.

(c) An increase in ductility.

(d) An increase in malleability.

Tuesday, 8 December 2015

Friday, 4 December 2015

Q:- What is the UTS of a material :

(a) The proof stress.
(b) The maximum load a specimen can withstand.
(c) The limit of proportionality.
(d) The point of plastic deformation.

Q:- What is the purpose of a rectifier :

(a) To adjust the voltage.
(b) To adjust the amperage.
(c) To covert ac to dc.
(d) To reduce the chance of arc strike

Wednesday, 2 December 2015

Q:- welding process using equipment with a flat characteristic :

(a) Will require a permanent or temporary backing to be pre placed on the Root side of the welds.

(b) Has the advantage of being able to use any type or size of electrode.

(c) Is likely to be using an electrode less than 2 mm dia.

(d) Is likely to be using an electrode more than 2 mm dia.

Thursday, 26 November 2015

Q:- Which of the following is most apt to render the post-emulsification test ineffective :

(a) Too long of a penetrant time.

(b) Too long of a developing time.

(c) Too long of an emulsifying time.

(d) None of the above.

Tuesday, 24 November 2015

AWS CWI Seminar/Exam Registration Ahmedabad

Dear Welding Professionals,
We at Eurotech are happy to inform you that Eurotech has announced its 6 Days Training and 1 day Exam program of AWS-CWI training and certification seminar in Ahmedabad.
We are sole AWS CWI training provider in India whose results are better than the others. Our previous result was 80-90%. Most of our candidates successfully pass the exam in their very first attempt. If you want to become one of them, you have to just register for the course and become a successful person in your life by getting this reputed certification.
Click Here to register for this Eurotech AWS CWI Certified welding inspector Training Seminar Ahmedabad December 2015
Interested candidates can drop their Email id and Mobile no in Comment..
Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com

Monday, 23 November 2015

Q:- An essential variable may :

(a) Change the properties of the weld.
(b) Influence the visual acceptability.
(c) Require re-approval of the weld procedure.
(d) All of the above.

Wednesday, 18 November 2015

5 Steps How to Become a Certified Welding Inspector

5 Steps How to Become a Certified Welding Inspector

The path to becoming a certified welding inspector follows several steps.
  1. Send in your certified welding inspector application form. ...
  2. Choose your exam site. ...
  3. Fulfill education and work experience requirements. ...
  4. Complete welding inspector training. ...
  5. Pass the AWS certified welding inspector exam and a vision test.

If you are interested to Become A Certified Welding Inspector, Please Share your Email idPhone No. and Location so that we will provide you details about CWI Course.

Monday, 9 November 2015

Join Our AWS CWI Training Seminar in New Delhi



Dear QC Heads,

We are happy to tell you that Eurotech is going to start its next 7 days AWS-CWI certification program for the New Delhi location. Those who are interested for the exam and want to become an AWS approved Certified Welding Inspector (CWI) then Eurotech is the best choice to do with.
We are an authorized agent of American Welding Society (AWS) for their training and Exam in India. So come forward and register for the course today as registration has started for the Chennai course.

Click Here to register for this Eurotech AWS CWI Certified welding inspector Training Seminar New Delhi Nov 2015

Take free AWS CWi Practice Test New Delhi



Interested candidates can drop their Email id and Mobile no in Comment..
Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com

Wednesday, 4 November 2015

AWS CWI-- Certification/Seminar Schedules India 2016





Eurotech Announced AWS CWI Training Schedule in India 2016



We are glad to inform you that Eurotech has announced its 6 Days Training and 1 Day Exam schedule for 2016. We are going to organize our new courses of AWS-CWI for  India.



So anyone who wants to become an AWS approved welding Inspector can join our course and get this prestigious certification and leads to greater heights in his career.



Click here To See AWS CWI Training Schedule India 2016


Interested Candidates Can write or call Us for More Information 

Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com |Eurotech ACS Pvt. Ltd.

Monday, 2 November 2015

Q:- Which of the following processes use a constant characteristic :


  • Sub-arc < 1000 amps, MMA, Electro slag.
  • TIG / TAG, Sub-arc > 1000 amps, Electro slag.
  • Sub-arc < 1000 amps, MIG / MAG, Electro slag.
  • MIG / MAG, Sub-arc > 1000 amps, Electro Slag.

Thursday, 29 October 2015

Thursday, 15 October 2015

How to Renewal your AWS CWI Certificate?

Appearing for AWS-CWI exam is very easy as various agents of AWS throughout the world are conducting this exam but the problem is lack of knowledge among the staff of the these agents who don’t provide proper information to the aspirants so they search here and there to get proper information. The marketing staff of these agents only tells them about how to register for the exam. But what about after passing the exam? How would they maintain their AWS-CWI certification? What is the renewals process of AWS-CWI and after how many years there is need to renew the certification? After getting these kinds of inquiries, Eurotech is writing this article on what is the AWS-CWI renewal process so as to help all the AWS-CWI holders. Please see the below process of AWS-CWI renewal:


  • The period of validity for AWS-CWI certification is three (3) years. 
  • The AWS-Certified Welding Inspector shall be responsible for maintaining a current address with the AWS Certification Department.
To be eligible for renewal, the AWS-CWI holder must:
  • Submit an approved renewal application to the AWS Certification Department by the expiration date of the current certification and no earlier than 6 months prior to the expiration date of that certification. 
  • AWS may send a renewal notice, but if not received, it remains the responsibility of the AWS-CWI holder to renew on time. 
  • The AWS-CWI holder requesting renewal of certification shall attest to having no period of continuous inactivity greater than two years in activities during the previous three years of certification. 
  • AWS-CWI holder not meeting the requirements of 15.4 from AWS QC1 may renew by taking the CWI part B Practical exam and meet the scoring requirements of 6.2.2 of QC1. 
  • AWS-CWI certification renewals are limited to only two consecutive three-year periods.


For example,
  1. Certification granted, May 1, 2014 
  2. Certification expires, May 1, 2017 (Start applying for renewal so as to avoid re exam and training) 
  3. Administrative extension period, May 1, 2017 to June 30, 2017
After June 30, 2017, applicant must be re exam and training for AWS CWI.

Our AWS CWI renewal cost is as below:

The AWS-CWI renewal fees subject to change from time to time. Please call or mail us to know the renewal fees.

Monday, 12 October 2015

Q:- Bend test are used for which of the following


  • To check tensile strength & fusion
  • To check yield strength & fusion
  • To check ductlity strength & fusion
  • To check yield strength & ductility

Tuesday, 6 October 2015

Q:-which of the following is considered the main restriction of the radiography method of NDT

  • The detection of planar defects oriented parallel to the beam direction 
  • The range of material thickness it can be used for 
  • Can’t be used for remote site work 
  • The range of material type it can be used for

Wednesday, 30 September 2015

Q:-The WPS calls for a root gap to be between 2mm and 3mm, the actual measure gap is 4mm what course of action would you take?

  • Accept it as its only 1mm
  • Reject it
  • The welder will decide, if it falls it will be his problem
  • Welder insists he can weld the butt joint easily so let him go ahead

Monday, 28 September 2015

AWS -CWI- Seminar/Exam Registration in Mumbai


Dear Welding Professionals,

We are delighted to convey you that Eurotech has announced its AWS-CWI 6 days Training and 1 Day exam course for the Mumbai location. Eurotech is one of the leading welding training providing organizations in India with success rate of 90%. We are the only organization who provides job after the course by uploading your resume on our own job site with 500 consultants.

If anyone looking for lucrative career in welding, then go for AWS – CWI (Certified Welding Inspector) program.

Click Here to Register for Certified Welding Inspector (CWI) Prep Course and Exam In Mumbai

Become A CWI (Certified Welding Inspector). You Can share your E-mail and Mobile no in comments. so that i can send you some details of AWS CWI.

Write or call Us for More Information 
Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com

Thursday, 10 September 2015

Q:- Which of these statements are true concerning lamellar tearing


  • A hydrogen level increase lamellar tearing which more likely 
  • As material thickness increase ductility decease making lamellar tearing more likely 
  • Lamellar tearing occur in a HAZ 
  • Lamellar tearing effect all type of joints

Wednesday, 9 September 2015

CWI Training and Certification Seminar Chennai



The special AWS CWI Exam Plus Training and Certification Seminar in Chennai Course shall be organized Eurotech. It's always a good time to learn your welding fundamentals. And Eurotech Learning makes it easy with this CWI Training Course.

This is your chance to become Certified as one of the following:

  • Certified Welding Inspector (CWI)
  • Certified Associate Welding Inspector (CAWI)
  • Senior Certified Welding Inspector (SCWI)
  • Certified Welding Educator (CWE)
Click Here To Register for AWS CWI Training Seminar in Chennai

If you want to Become Certified Welding Inspector. You Can share your E-mail and Mobile No. in comments. so that i can send you some details of AWS CWI.


Puneet Sharma | Call : 08196980555 | E-Mail : AWS.CWI.Training@Gmail.Com

We kindly request you all, please Share this post in your friend circles....

Monday, 7 September 2015

Q:- A high level of surface cleaning is important prior to penetrant testing in order to


  • The reduce the amount of penetrate used 
  • Reduce the level of false identification 
  • Ensure a good bound for the developer 
  • Improve the viscosity of the penetrate

Monday, 17 August 2015

Q:- The main problem with solution treatment of stainless steel is that

  • Cnrolling the rate of temperature rise
  • Controlling the cooling rate
  • Length of the soak period
  • High risk of distrotiom

Monday, 10 August 2015

Q:-When welding vertically up with MMA process weaving is sometimes restricted to 2.5 x electrode diameter, this restriction is mainly applied to

  • Reduce the overall width of the weld
  • Limit the heat input into the joint
  • Reduce the no. of electrode in the joint
  • Reduce the time require to finish the weld

Wednesday, 29 July 2015

AWS CWI - Official Training Seminar In Chennai


Dear Quality Engineers,


We are delighted to convey you that Eurotech AWS American Welding Society Agent India’s one of the topmost welding training provider has announced its 7 days AWS-CWI (certified Welding Inspector) certification program for the Chennai location.

Those who are interested & want to become Certified Welding Inspector (CWI) and achieve greater heights in welding fields then to do AWS-CWI with Eurotech is the right choice. We are the only certified agent in India who organize course in five different locations with reasonable fees as compare to other training provider of AWS-CWI.

So hurry up! Get register today for the course and fulfill your dreams by becoming a certified welding Inspector.

Interested Candidates Can Drop Their E-mail id and Mobile No. 
For More Information Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com
Kindly request you all to Share this post  in your friends circles.....

Tuesday, 28 July 2015

Tuesday, 21 July 2015

Tuesday, 14 July 2015

AWS CWI Welding Training Course in Ahmedabad



Dear Quality Professionals,

Now is your chance to become certified welding inspector. Just attend our CWI Seminar & Exam in Ahmedabad this month. 

We are delighted to inform you that Eurotech AWS India‘s top welding training provider has announced its 7 days AWS-CWI certification program for Ahmedabad location.

We have been doing this course from the past 6 years and our candidates are scoring above 80% in AWS-CWI in their primary attempt. We are a certified agent of American Welding Society (AWS) for their training and exam in India. If you wish for becoming a certified welding inspector, then go for Eurotech AWS-CWI program.

Interested Candidates Can write or call Us for More Information Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com

Please Promote us, forward to your friends circles..... 

Tuesday, 7 July 2015

Q:- In a fillet weld fracture test the specimen is broken with

  • The fillet weld in tesnsion 
  • The fillet weld in compression 
  • No specific method need to be adapoted 
  • Suitable machining

Thursday, 2 July 2015

Q:- A plug weld and a spot weld differ in which h of the following

  • A plug weld has a hole in one member 
  • A spot weld has a hole in one member 
  • A spot weld is an arc weld 
  • A plug weld is a friction weld

Tuesday, 23 June 2015

Q:- Weld decay begins to occure


  • Imidetly after the welding
  • After post wel heat treatment
  • Faster in low carbon grades
  • Slower in low carbon grades

Friday, 19 June 2015

CWI Training Exam in Chennai

AWS CWI Training Exam in Chennai



Eurotech has announced its 6 Days Training and 1 day Exam program of AWS-CWI, CAWI, SCWI, CWE certification for the Chennai location.


This is your chance to become Certified as one of the following: 


  • Certified Welding Inspector (CWI) 
  • Certified Associate Welding Inspector (CAWI) 
  • Senior Certified Welding Inspector (SCWI) 
  • Certified Welding Educator (CWE)


So you want to be a certified welding inspector? If you want to Become Certified Welding Inspector. You Can share your E-mail and Mobile No. in comments. so that i can send you some details of AWS CWI.

Interested Candidates Can write or call Us for More Information 
Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com 
Please Promote us, forward to your friends circles..... 

Monday, 15 June 2015

Q:- E Size and number of tack weld are


  • An important consideration 
  • They are depend on the thickness and base material being welded 
  • For some material preheat may have to be used 
  • All of the above


Saturday, 13 June 2015

Thursday, 4 June 2015

Monday, 25 May 2015

AWS CWI TRAINING SCHEDULE AHMEDABAD 2015




EUROTECH AWS CWI SCHEDULE AHMEDABAD 2015, INDIA
SR.NOSITE CODEMONTHSEMINAR DATESEXAM DATECITY
1IN44315JULY22nd TO 27th JULY28th JULYAHMEDABAD
2IN44815SEPTEMBER7th TO 12th SEPT13th SEPTAHMEDABAD
3IN45315DECEMBER4th DEC TO 9th DEC10th DECAHMEDABAD


Dear Welding Professionals,

We are delighted to inform you that Eurotech one of the leading welding training providers in India has announce its training schedule of AWS-CWI for Ahmedabad, 2015. We at Eurotech provide 6 days Training and 1 day Exam of AWS-CWI in India.

You can register for the course on Eurotech website 

Click Here To Register AWS CWI Certified welding inspector AHMEDABAD JULY 2015
Click Here To Register  AWS CWI Certified welding inspector AHMEDABAD SEPT 2015
Click Here To Register  AWS CWI Certified welding inspector AHMEDABAD  DEC  2015

You can also write or call us to assist on the below email id and contact no.

 Puneet Sharma | Call : 08196980555 |  E-Mail : aws.cwi.training@gmail.com 

Q:-The welder has increased electrode stick out length of the SAW set, what would be the effect on the weld

Tuesday, 12 May 2015

AWS CWI Training Course in Coimbatore

AWS CWI Training seminar In Coimbatore May 2015
AWS CWI Training seminar In Coimbatore May 2015

Dear All Welding Engineers we wish to inform you that your Best chance to Become a Certified Welding Inspector (CWI), Eurotech organizing 6 Day AWS CWI Training Seminar In Coimbatore 

Location: Coimbatore, India 

Start Date: May 25, 2015 
End Date: May 31, 2015 

Interested Candidates Can Contact Us:  Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com 
Please promote us,please forward to your friends circles..

Q:- One the advantages of ultrasonic inspection in relation to radiographic testing to

  • Access is generally only required from one side (surface)of the component being tested 
  • The designated work area must be closed off by barriers, therefore safety is increased 
  • This materials can be easily examined 
  • A permanent image of the defect can be obtained

Friday, 8 May 2015

Q:- For the structure termed martensitic to form in a c-mn steel it must first be heated to just below a critical temperature and rapidly cooled

  • Just below its lower critical temperature and rapidly cooled 
  • A maximum temperature of 550*C then rapidly cooled 
  • Above its upper critical temperature and slowly furnace cooled 
  • A full transformation to austenite then rapidly cooled

Wednesday, 6 May 2015

Tuesday, 5 May 2015

Q:- Why is it essential to clean the surrounding parent metal adjacent to the weld metal made by MMA(SMAW)which is to be ultrasonically tested?

  • Sound waves will not travel though paint 
  • Remove any rust 
  • The spatter will impede the contact of the probe and the parent material surface 
  • Spatter will reflect the back will echo signal and give spurious indications

Q:- Clustered porosity found internally in the body other open cf an MMA welding is usually associated with

  • Poor inter pass cleaning 
  • The open circuit current being too high 
  • Poor stop/start technique or damp electrode coating 
  • Low open circuit voltage

Monday, 4 May 2015

Q:- You find out that contractor have carried out RT as the 10% contractual percentage required by the specification code. The specification also insists that an additional 2 weld, radiographed for every weld that is failed. One of the pipe's spools had an au acceptable defect which the contractor has ignored and radiographed another weld in its place which is acceptable, what would be your course of action be?

  1. As long as the other radiograph butt weld is acceptable it's ok, as the 10% condition percentage required by the specification code has been satisfied
  2. This is usual practice as 10% NDT is really not important
  3. Review the original failed weld and insist they have the additional 2 welds radiographed
  4. Review the original have it failed weld and repaired , radiographed , then I would insist that they have an additional 2 weld radiographed

Friday, 1 May 2015

Q:- Some codes require the excess weld metal (weld cap) on cross weld joint tensile specimens to be flush ground, this is because:

  • Flushed caps will always break in the weld metal area 
  • This is to remove any porosity in the excess weld metal (weld cap) 
  • It is easier to calculate the cross section areas of the joint when fused 
  • Flushed caps have fuser stress raisers and therefore give a more aqua rate result

Wednesday, 29 April 2015

Q:- With the DPI method of inspection, after the contact time as elapsed the dye should


  • Spraying the surface with the remover till all dye as gone then wipe with a clean cloth 
  • Spraying with developer then wiping with a cloth 
  • Wipe clean, using lint free cloth soaked in a solvent remover 
  • It does not matter how it is done as long as all traces of dye are removed.

Monday, 27 April 2015

AWS CWI TRAINING SCHEDULE NEW DELHI 2015

                       

EUROTECH AWS CWI SCHEDULE Delhi 2015, INDIA
SR.NOSITE CODEMONTHSEMINAR DATESEXAM DATECITY
1IN44315FEBUARY6th TO 11th FEB12th FEBDelhi
2IN44815MAY9th TO 14th MAY15th MAYDelhi
3IN45315AUGUST14th TO 19th AUGUST20th AUGUSTDelhi
4IN45715NOVEMBER15th TO 20th JUNE9th JULYDelhi


Dear Welding Professionals,

We at Eurotech are delighted to inform you that Eurotech has announced its 6 days Training and 1 Day Exam schedule for 2015 New Delhi location. Anyone who want to achieve greater heights in his welding career, then AWS-CWI certification is the ultimate opportunity in achieving those goals.

You can register for the course on Eurotech website 


You can also write or call us to assist on the below email id and contact no.

 Puneet Sharma | Call : 08196980555 |  E-Mail : aws.cwi.training@gmail.com