Q:- Welding may be done by which of the following processes:

1. SAW
2. SMAW
3. GTAW
4. GMAW
5. all of the above

Q:- What is the range of thickness of base metals that AWS D1.1 covers?

1. All thicknesses
2. All thicknesses exceeding 1/8 inch
3. Only thicknesses between 1/8 inch and 1 inch
4. Thicknesses of 1/8 inch and greater

Q:-What test specimens are required?

A. Side bends tests
B. 1 Face bend and 1 root bend
C. 1 T-joint break
D. 2 Side bends and 2 root bends
E. None of the above

Q:- Welding inspection personnel shall be qualified by:

A. American Welding Society
B. American Society for Nondestructive Testing
C. American Petroleum Institute
D. American Society of Mechanical Engineers
E.  Experience and training for the specified inspection task they perform

Q:-For what thickness is this qualification valid

A. Unlimited
B. Also qualifies for welding fillet welds on the material of unlimited thickness
C. a&b
D. 5/16” to ¾”
E. None of the above

Q:- Welding inspection personnel shall be qualified by:

1. American Welding Society
2. American Society for Nondestructive Testing
3. American Petroleum Institute
4. American Society of Mechanical Engineers
5. experience and training for the specified inspection task they perform

Q:- Open corner joint is one of the following

1. BUTT WELD
2. FILLET WELD
3. PLUG WELD
4. SPOT WELD

Q:-Which of the following welding processes. Uses to resistance spot welding?

1. Electro slag welding 
2. Resistance spot welding 
3. Tig 
4. Mag

Q:- The dip transfer mode. Of metal transfer uaed for mig/ mag welding is characteristics by

1. Giving deep penetration
2. Being suitable for position welding
3. Giving low spatter
4. All of the above

Q:-With reference to the various grades of stainless steel which of the following statement is true?

1. They are all nonmagnetic
2. Only certain grades can be used for service at a very low temperature
3. They are all 100 ar for the mag
4. They are all very high thermal conductivity

Q:- What does the term high frequency mean when referring to TIG Welding?

A. A high integrity weld is easily achievable 
B. The power source gives a high duty cycle 
C. A high voltage spark is used to initiate the arc 
D. The output from the power source is high

Q:- Which of the following may increase the risk of haz cracking when welding thick section carbon manganese steel?

1. Slow cooling after welding 
2. Low moisture content in the electrode covering 
3. Use of a steel grade with a low cev 
4. Use of a low heat input 

Q:-What is meant by the term duty cycle?

A. How long a welder can weld for in a given period 
B. The amount of time the electrodes are being used 
C. The amount of time a welding machine can be weld 
D. The amount of electricity being consumed 

Q:- To BS 499 part 2, which of the following is true for a welding symbol?

1. This or arrow side of the joint goes on top of the reference line 
2. This or arrow side of the joint goes below the reference line 
3. This or arrow side of the joint goes in the middle of the reference line 
4. All of the above

Q:- In the welding procedure qualification above, what is the required and acceptable NDT method to be used to verify the soundness of the weld?

1. VT
2. UT only
3. RT only
4. RT or UT
5. None of the aboves

What is an active flux?

1. A material used to clean surfaces of the joint through continued chemical reaction
2. A material used to protect the molten weld pool during welding
3. A material used to aid fusion
4. All of the above

Q:- High intensity energy beams are associated with which of the following welding process

1. Laser 
2. Electron beam 
3. Plasma  
4. All of the above 

Q:-What test specimens are required for this qualification test?

A. 2 reduced section tensiles, 2root bends, 2 face bends
B. 2 reduced section tensiles, 4 side bends
C. 2 reduced section tensiles, 2root bends, 2 face bends, 2 macro etch specimens
D. 2 reduced section tensiles, 2root bends, 2 face bends, 4 side bends
E. None of the above

Q:- A high level of surface cleaning is important prior to penetrant testing in order to

A. The reduce the amount of penetrate used
B. Reduce the level of false identification
C. Ensure a good bound for the developer
D. Improve the viscosity of the penetrate 

Q:- When 2 different material types are welded together, the joint may be referred to as……..

1. A Composite Joint 
2. A Transition Joint 
3. A Dissimilar Metal Joint 
4. Either 2 or 3