Q:- A high level of surface cleaning is important prior to penetrant testing in order to

A. The reduce the amount of penetrate used
B. Reduce the level of false identification
C. Ensure a good bound for the developer
D. Improve the viscosity of the penetrate 

Q:- When 2 different material types are welded together, the joint may be referred to as……..

1. A Composite Joint 
2. A Transition Joint 
3. A Dissimilar Metal Joint 
4. Either 2 or 3 

Q:- The exposed surfaces of each fillet-weld-break specimen shall show:

1. No Slag inclusions greater than 1/4 inch
2. At least 3/4 inches sound metal between adjacent inclusions
3. Complete penetration and fusion
4. The tensile strength of the specimen
5. None of the above