Tuesday, 2 May 2017

Q:- For pipe ends of the same nominal wall thickness, the alignment offset requirement is:

1. Not more than 1/4 inch
2. Not more than 1/8 inch 
3. Not more than 1/32 inch 
4. If misalignment is larger than 1/16 inch due to dimensional variations, it shall be equally 
distributed around the circumference of the pipe.
5. None of the above
Posted by at
Labels: , ,

1 comment:

  1. Eiwaa Groups20 May 2021 at 23:24

    Thanks for this Post…Welder Qualification Test of Welder certification is based on specially designed tests to determine a welder’s skill and ability to deposit sound weld metal. The welder’s tests consist of many variables, including the specific welding process, type of metal, thickness, joint design, position, and others. Most often, the test is conducted in accordance with a particular code. Once welder test requirements have been established, we can carry out an assessment to evaluate the welders’ current skill level.
    Zone Certification
    Eddy Current Testing
    Storage Tank Survey
    ADNOC Approved

    ReplyDelete

Subscribe to: Post Comments (Atom)