- Tungsten inclusion
- Spatter on the cap
- Copper inclusion
- It is most likely to be a film mark
Eurotech an authorized Agent of American Welding Society(AWS). We conduct AWS CWI Examination with documented training in INDIA and MIDDLE EAST. For More Information contact to Mr.Puneet Sharma E-mail: (aws.cwi.training@gmail.com)
Monday 21 December 2015
Q:- When reviewing a radiograph of a weld made by the MAG(GMAW)process, you notice a very bright white inclusion in the weld, which of the following best describes this indication
Q:-Why is stress relief (PWHT) some times carried out on weldments :
(a) To dissolve entrapped hydrogen.
(b) To remove residual stresses.
(c) To fuse planar defects.
(d) All of the above.
(b) To remove residual stresses.
(c) To fuse planar defects.
(d) All of the above.
Friday 18 December 2015
Q:- In friction welding, is the metal at the interface in the :
(a) Liquid state.
(b) Solid state.
(c) Plastic state.
(d) Elastic state.
(b) Solid state.
(c) Plastic state.
(d) Elastic state.
Thursday 17 December 2015
Q:-Most metals expand when heated, the change in length is expressed as :
(a) Thermal conductivity.
(b) Modulus of elasticity.
(c) Coefficient.
(d) Yielding.
(b) Modulus of elasticity.
(c) Coefficient.
(d) Yielding.
AWS CWI Seminar Chennai
Eurotech offer seven days of intensive CWI training that will help prepare you to pass the CWI certification tests. AWS CWI (American Welding Society - Certified Welding Inspector) course and exam will be performed on 18-24 December 2015 in Chennai India.
Course Description
- Welding Inspection Technology Workshop - 3 DAYS
- Visual Inspection Workshop( 1.5 Day)
- API 1104 Code Clinic( 1.5 DAY)
Course Benefits:
- Official Course for AWS CWI Certification
- 6 Days Intensive Training
- Includes Basic NDT Techniques and Welding Techniques
- Results in Deeper Understanding of Welding Quality
Contact us by email or phone about the course. Puneet Sharma Email id: aws.cwi.training@gmail.com +91-8196980555
Wednesday 16 December 2015
Q:- Which of the following statements is true :
(a) Oxygen-fuel gas cutting is essentially an oxidization thermal cutting Process.
(b) Oxygen-fuel gas cutting is essentially a melting process.
(c) The only fuel gas used is acetylene.
(d) Propane is the preferred fuel gas in oxygen-fuel gas cutting as it produces Hotter flame.
Tuesday 15 December 2015
Q:- Three essential factors for producing fusion weld are melting, removal of surface oxide from the joint surfaces and elimination of atmosphere from the region of the arc. Name the fourth one :
(a) The weld must be free from stress.
(b) The filler material must match that of the weld.
(c) The completed joint must at lease match the mechanical properties.
(d) An arc for a heat surface.
Monday 14 December 2015
Q:- Which one of the following statements is false :
(a) Surface breaking defects are usually more detrimental to a weld in Comparison with sub-surface defects.
(b) The HAZ's of a steel weld usually have a higher tensile strength than The weld metal.
(c) Lameller tearing may occur within the fusion zone of large fillet welds.
(d) PWHT may stress relieve.
Sunday 13 December 2015
Q:- What is the possible cause of too mush restraint of the parent material during welding :
(a) Restraint is always desirable.
(b) It may lead to cracking, especially with small welds between large components.
(c) It will cause too much distortion.
(d) It will cause lamellar tearing if it is present on a corner joint.
(b) It may lead to cracking, especially with small welds between large components.
(c) It will cause too much distortion.
(d) It will cause lamellar tearing if it is present on a corner joint.
Friday 11 December 2015
Q:-A martensite grain structure :
(a) Is always present in welds on steel.
(b) Is brittle grain structure .
(c) Is obtained when the preheat temperature exceeds 200*c
(b) Is brittle grain structure .
(c) Is obtained when the preheat temperature exceeds 200*c
Thursday 10 December 2015
Q:- Which of the following standards is entitled imperfections in Metallic fusion welds With explanation :
(a) BS EN 25817.
(b) BS EN 26520.
(c) BS EN 22553.
(d) BS EN 24165.
(b) BS EN 26520.
(c) BS EN 22553.
(d) BS EN 24165.
Wednesday 9 December 2015
AWS CWI Training Chennai India
Eurotech offer 6 days of intensive CWI (Certified Welding Inspector) training and 1 day Exam that will help prepare you to pass the AWS CWI certification tests. Our experienced instructors will help you learn the material you need to know fast, and show you how to use and understand the latest standards.
This is your chance to become Certified as one of the following:
This is your chance to become Certified as one of the following:
- Certified Welding Inspector (CWI)
- Certified Associate Welding Inspector (CAWI)
- Senior Certified Welding Inspector (SCWI)
- Certified Welding Educator (CWE)
Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com
We kindly request you all to Share this post ..
Q:-High Phosphorous contents in carbon steels may cause :
(a) Cold shortness.
(b) Hot shortness.
(c) An increase in ductility.
(d) An increase in malleability.
(b) Hot shortness.
(c) An increase in ductility.
(d) An increase in malleability.
Tuesday 8 December 2015
Q:- How do you convert psi to N/mm2 :
(a) Divide by 144.9.
(b) Multify by 25.4.
(c) Divide by 14.7.
(d) Multify by 14.7.
(b) Multify by 25.4.
(c) Divide by 14.7.
(d) Multify by 14.7.
Monday 7 December 2015
Friday 4 December 2015
Q:- What is the UTS of a material :
(a) The proof stress.
(b) The maximum load a specimen can withstand.
(c) The limit of proportionality.
(d) The point of plastic deformation.
(b) The maximum load a specimen can withstand.
(c) The limit of proportionality.
(d) The point of plastic deformation.
Q:- What is the purpose of a rectifier :
(a) To adjust the voltage.
(b) To adjust the amperage.
(c) To covert ac to dc.
(d) To reduce the chance of arc strike
(b) To adjust the amperage.
(c) To covert ac to dc.
(d) To reduce the chance of arc strike
Wednesday 2 December 2015
Q:- welding process using equipment with a flat characteristic :
(a) Will require a permanent or temporary backing to be pre placed on the Root side of the welds.
(b) Has the advantage of being able to use any type or size of electrode.
(c) Is likely to be using an electrode less than 2 mm dia.
(d) Is likely to be using an electrode more than 2 mm dia.
(b) Has the advantage of being able to use any type or size of electrode.
(c) Is likely to be using an electrode less than 2 mm dia.
(d) Is likely to be using an electrode more than 2 mm dia.
Tuesday 1 December 2015
Q:- Which of the following is discontinuity which might be found in sand casting :
(a) Incomplete penetration.
(b) Undercut.
(c) Pipe.
(d) Shrinkage.
(b) Undercut.
(c) Pipe.
(d) Shrinkage.
Monday 30 November 2015
AWS CWI Exam Tips for Success
- Click Here to Read How to Become a CWI: Tips for Success
- Click Here to Read How to Prepare for the Certified Welding Inspector Exam Part 2: Understanding the
- TestClick Here To see CWI Test Dates for India 2016 - Find CWI Exam Dates Here
- Click Here To see AWS CWI Price List 2016
- Click Here To See AWS CWI Training Schedule 2016 India
- Click Here To See AWS CWI/SCWI Renewal Form India
- Click Here To See AWS CWI/SCWI Application Form India
- Click Here To See CWI ReExam Form India
If you are interested to Become a Certified Welding Inspector (CWI) you can dorp Your Contact Details.
Puneet Sharma | +91-8196980555 | E-mail: aws.cwi.training@gmail.com
Puneet Sharma | +91-8196980555 | E-mail: aws.cwi.training@gmail.com
Thursday 26 November 2015
Q:- Which of the following is most apt to render the post-emulsification test ineffective :
(a) Too long of a penetrant time.
(b) Too long of a developing time.
(c) Too long of an emulsifying time.
(d) None of the above.
(b) Too long of a developing time.
(c) Too long of an emulsifying time.
(d) None of the above.
Tuesday 24 November 2015
AWS CWI Seminar/Exam Registration Ahmedabad
Dear Welding Professionals,
We at Eurotech are happy to inform you that Eurotech has announced its 6 Days Training and 1 day Exam program of AWS-CWI training and certification seminar in Ahmedabad.
We are sole AWS CWI training provider in India whose results are better than the others. Our previous result was 80-90%. Most of our candidates successfully pass the exam in their very first attempt. If you want to become one of them, you have to just register for the course and become a successful person in your life by getting this reputed certification.
Click Here to register for this Eurotech AWS CWI Certified welding inspector Training Seminar Ahmedabad December 2015
We are sole AWS CWI training provider in India whose results are better than the others. Our previous result was 80-90%. Most of our candidates successfully pass the exam in their very first attempt. If you want to become one of them, you have to just register for the course and become a successful person in your life by getting this reputed certification.
Click Here to register for this Eurotech AWS CWI Certified welding inspector Training Seminar Ahmedabad December 2015
Interested candidates can drop their Email id and Mobile no in Comment..
Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com
Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com
Monday 23 November 2015
Q:- An essential variable may :
(a) Change the properties of the weld.
(b) Influence the visual acceptability.
(c) Require re-approval of the weld procedure.
(d) All of the above.
(b) Influence the visual acceptability.
(c) Require re-approval of the weld procedure.
(d) All of the above.
Wednesday 18 November 2015
5 Steps How to Become a Certified Welding Inspector
5 Steps How to Become a Certified Welding Inspector
- Send in your certified welding inspector application form. ...
- Choose your exam site. ...
- Fulfill education and work experience requirements. ...
- Complete welding inspector training. ...
- Pass the AWS certified welding inspector exam and a vision test.
If you are interested to Become A Certified Welding Inspector, Please Share your Email id, Phone No. and Location so that we will provide you details about CWI Course.
Monday 16 November 2015
Q:- Flame cut preparation may, during welding, increase the likelihood of :
(a) Cracking.
(b) Misalignment problems.
(c) Inclusions.
(d) All of the above.
(b) Misalignment problems.
(c) Inclusions.
(d) All of the above.
Monday 9 November 2015
Join Our AWS CWI Training Seminar in New Delhi
Dear QC Heads,
We are happy to tell you that Eurotech is going to start its next 7 days AWS-CWI certification program for the New Delhi location. Those who are interested for the exam and want to become an AWS approved Certified Welding Inspector (CWI) then Eurotech is the best choice to do with.
We are an authorized agent of American Welding Society (AWS) for their training and Exam in India. So come forward and register for the course today as registration has started for the Chennai course.
Click Here to register for this Eurotech AWS CWI Certified welding inspector Training Seminar New Delhi Nov 2015
Take free AWS CWi Practice Test New Delhi
Interested candidates can drop their Email id and Mobile no in Comment..
Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com
Saturday 7 November 2015
Q:-In accordance with BS 2901 which of the following is classified as triple De-oxidized filler wire:
(a) A !7 wire.
(b) A 18 wire.
(c) A 15 wire.
(d) All of the above.
(b) A 18 wire.
(c) A 15 wire.
(d) All of the above.
Wednesday 4 November 2015
AWS CWI-- Certification/Seminar Schedules India 2016
Eurotech Announced AWS CWI Training Schedule in India 2016
We are glad to inform you that Eurotech has announced its 6 Days Training and 1 Day Exam schedule for 2016. We are going to organize our new courses of AWS-CWI for India.
So anyone who wants to become an AWS approved welding Inspector can join our course and get this prestigious certification and leads to greater heights in his career.
Click here To See AWS CWI Training Schedule India 2016
Interested Candidates Can write or call Us for More Information
Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com |Eurotech ACS Pvt. Ltd.
Monday 2 November 2015
Q:- Which of the following processes use a constant characteristic :
- Sub-arc < 1000 amps, MMA, Electro slag.
- TIG / TAG, Sub-arc > 1000 amps, Electro slag.
- Sub-arc < 1000 amps, MIG / MAG, Electro slag.
- MIG / MAG, Sub-arc > 1000 amps, Electro Slag.
Thursday 29 October 2015
Q:- SAW in single pass weld will give :
- Poor profile.
- Burn rapidly.
- Good penetration.
- None of the above.
Saturday 24 October 2015
Q:- In SAW process if voltage and current is increased and travel speed is decreased, What will be the effect in the profile :
- Wider weld.
- Higher weld reinforcement.
- Concave weld surface.
Saturday 17 October 2015
Q:-In the welding of a butt joint made from one side, which of the following controls the profile of the root bead :
- Root face.
- Bevel angle.
- Root gap.
- None of the above.
Thursday 15 October 2015
How to Renewal your AWS CWI Certificate?
Appearing for AWS-CWI exam is very easy as various agents of AWS throughout the world are conducting this exam but the problem is lack of knowledge among the staff of the these agents who don’t provide proper information to the aspirants so they search here and there to get proper information. The marketing staff of these agents only tells them about how to register for the exam. But what about after passing the exam? How would they maintain their AWS-CWI certification? What is the renewals process of AWS-CWI and after how many years there is need to renew the certification? After getting these kinds of inquiries, Eurotech is writing this article on what is the AWS-CWI renewal process so as to help all the AWS-CWI holders. Please see the below process of AWS-CWI renewal:
For example,
Our AWS CWI renewal cost is as below:
The AWS-CWI renewal fees subject to change from time to time. Please call or mail us to know the renewal fees.
- The period of validity for AWS-CWI certification is three (3) years.
- The AWS-Certified Welding Inspector shall be responsible for maintaining a current address with the AWS Certification Department.
- Submit an approved renewal application to the AWS Certification Department by the expiration date of the current certification and no earlier than 6 months prior to the expiration date of that certification.
- AWS may send a renewal notice, but if not received, it remains the responsibility of the AWS-CWI holder to renew on time.
- The AWS-CWI holder requesting renewal of certification shall attest to having no period of continuous inactivity greater than two years in activities during the previous three years of certification.
- AWS-CWI holder not meeting the requirements of 15.4 from AWS QC1 may renew by taking the CWI part B Practical exam and meet the scoring requirements of 6.2.2 of QC1.
- AWS-CWI certification renewals are limited to only two consecutive three-year periods.
For example,
- Certification granted, May 1, 2014
- Certification expires, May 1, 2017 (Start applying for renewal so as to avoid re exam and training)
- Administrative extension period, May 1, 2017 to June 30, 2017
Our AWS CWI renewal cost is as below:
The AWS-CWI renewal fees subject to change from time to time. Please call or mail us to know the renewal fees.
Monday 12 October 2015
Q:- Bend test are used for which of the following
- To check tensile strength & fusion
- To check yield strength & fusion
- To check ductlity strength & fusion
- To check yield strength & ductility
Tuesday 6 October 2015
Q:-which of the following is considered the main restriction of the radiography method of NDT
- The detection of planar defects oriented parallel to the beam direction
- The range of material thickness it can be used for
- Can’t be used for remote site work
- The range of material type it can be used for
Wednesday 30 September 2015
Q:-The WPS calls for a root gap to be between 2mm and 3mm, the actual measure gap is 4mm what course of action would you take?
- Accept it as its only 1mm
- Reject it
- The welder will decide, if it falls it will be his problem
- Welder insists he can weld the butt joint easily so let him go ahead
Monday 28 September 2015
AWS -CWI- Seminar/Exam Registration in Mumbai
We are delighted to convey you that Eurotech has announced its AWS-CWI 6 days Training and 1 Day exam course for the Mumbai location. Eurotech is one of the leading welding training providing organizations in India with success rate of 90%. We are the only organization who provides job after the course by uploading your resume on our own job site with 500 consultants.
If anyone looking for lucrative career in welding, then go for AWS – CWI (Certified Welding Inspector) program.
Click Here to Register for Certified Welding Inspector (CWI) Prep Course and Exam In Mumbai
Become A CWI (Certified Welding Inspector). You Can share your E-mail and Mobile no in comments. so that i can send you some details of AWS CWI.
Write or call Us for More Information
Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com
Thursday 24 September 2015
Q:- Which one of these test would most probably used for welder qualification on a plate butt weld using 13mm low carbon steel
- CTOD
- Nick break test
- Fracture fillet test
- IZOD
Monday 21 September 2015
Q:- A typical minimum OCV requirement of MMA (111) using basic electrodes would be
- 70 Volts
- 40 Volts
- 100 Volts
- 20 Volts
Thursday 10 September 2015
Q:- Which of these statements are true concerning lamellar tearing
- A hydrogen level increase lamellar tearing which more likely
- As material thickness increase ductility decease making lamellar tearing more likely
- Lamellar tearing occur in a HAZ
- Lamellar tearing effect all type of joints
Wednesday 9 September 2015
CWI Training and Certification Seminar Chennai
The special AWS CWI Exam Plus Training and Certification Seminar in Chennai Course shall be organized Eurotech. It's always a good time to learn your welding fundamentals. And Eurotech Learning makes it easy with this CWI Training Course.
This is your chance to become Certified as one of the following:
- Certified Welding Inspector (CWI)
- Certified Associate Welding Inspector (CAWI)
- Senior Certified Welding Inspector (SCWI)
- Certified Welding Educator (CWE)
If you want to Become Certified Welding Inspector. You Can share your E-mail and Mobile No. in comments. so that i can send you some details of AWS CWI.
Puneet Sharma | Call : 08196980555 | E-Mail : AWS.CWI.Training@Gmail.Com
We kindly request you all, please Share this post in your friend circles....
Monday 7 September 2015
Q:- A high level of surface cleaning is important prior to penetrant testing in order to
- The reduce the amount of penetrate used
- Reduce the level of false identification
- Ensure a good bound for the developer
- Improve the viscosity of the penetrate
Monday 31 August 2015
Q:- A typical min OCV requirement for MMA using either rutile or cellulosic electrode would be
- 40 Volts
- 120 Volts
- 100 Volts
- 50 Volts
Thursday 20 August 2015
AWS CWI Training in Chennai
If You Want to take your welding career to the next level? Now is Your Best Chance. Just attend Our CWI Seminar & Exam in Chennai
If You Really want to Become CWI (Certified Welding Inspector). You Can share your E-mail and Mobile no in comments. so that i can send you some details of AWS CWI.
For More Information Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com
Kindly request you all to Share this post in your friends circles…..
If You Really want to Become CWI (Certified Welding Inspector). You Can share your E-mail and Mobile no in comments. so that i can send you some details of AWS CWI.
For More Information Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com
Kindly request you all to Share this post in your friends circles…..
Monday 17 August 2015
Q:- The main problem with solution treatment of stainless steel is that
- Cnrolling the rate of temperature rise
- Controlling the cooling rate
- Length of the soak period
- High risk of distrotiom
Monday 10 August 2015
Q:-When welding vertically up with MMA process weaving is sometimes restricted to 2.5 x electrode diameter, this restriction is mainly applied to
- Reduce the overall width of the weld
- Limit the heat input into the joint
- Reduce the no. of electrode in the joint
- Reduce the time require to finish the weld
Wednesday 5 August 2015
Q:-With regards to lamellar tearing buttering layer will?
- Improve tougness
- Improve hardness
- Improve ductility
Wednesday 29 July 2015
AWS CWI - Official Training Seminar In Chennai
Dear Quality Engineers,
We are delighted to convey you that Eurotech AWS American Welding Society Agent India’s one of the topmost welding training provider has announced its 7 days AWS-CWI (certified Welding Inspector) certification program for the Chennai location.
Those who are interested & want to become Certified Welding Inspector (CWI) and achieve greater heights in welding fields then to do AWS-CWI with Eurotech is the right choice. We are the only certified agent in India who organize course in five different locations with reasonable fees as compare to other training provider of AWS-CWI.
So hurry up! Get register today for the course and fulfill your dreams by becoming a certified welding Inspector.
Interested Candidates Can Drop Their E-mail id and Mobile No.
For More Information Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com
Kindly request you all to Share this post in your friends circles.....
Tuesday 28 July 2015
Q:-When using multiple SAW arc systems (twin wire etc) the arc after have different polarities are used as AC rather than DC polarity. This is to,
- Prevent the arc blow between the arcs
- To minimize the productivity
- To even out the power factoron the main supply
- Make it easier to initiate the arc
Tuesday 21 July 2015
Q:-When using multiple SAW arc systems (twin wire etc) the arc after have difference polarities are used as AC rather then DC polarity. This is to,
- Prevent the arc blow between the arcs
- To minimize the productivity
- To even out the power factoron the main supply
- Make it easier to initiate the arc
Tuesday 14 July 2015
AWS CWI Welding Training Course in Ahmedabad
Dear Quality Professionals,
Now is your chance to become certified welding inspector. Just attend our CWI Seminar & Exam in Ahmedabad this month.
We are delighted to inform you that Eurotech AWS India‘s top welding training provider has announced its 7 days AWS-CWI certification program for Ahmedabad location.
We have been doing this course from the past 6 years and our candidates are scoring above 80% in AWS-CWI in their primary attempt. We are a certified agent of American Welding Society (AWS) for their training and exam in India. If you wish for becoming a certified welding inspector, then go for Eurotech AWS-CWI program.
Interested Candidates Can write or call Us for More Information Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com
Please Promote us, forward to your friends circles.....
Tuesday 7 July 2015
Q:- In a fillet weld fracture test the specimen is broken with
- The fillet weld in tesnsion
- The fillet weld in compression
- No specific method need to be adapoted
- Suitable machining
Thursday 2 July 2015
Q:- A plug weld and a spot weld differ in which h of the following
- A plug weld has a hole in one member
- A spot weld has a hole in one member
- A spot weld is an arc weld
- A plug weld is a friction weld
Tuesday 23 June 2015
Q:- Weld decay begins to occure
- Imidetly after the welding
- After post wel heat treatment
- Faster in low carbon grades
- Slower in low carbon grades
Friday 19 June 2015
CWI Training Exam in Chennai
AWS CWI Training Exam in Chennai
Eurotech has announced its 6 Days Training and 1 day Exam program of AWS-CWI, CAWI, SCWI, CWE certification for the Chennai location.
This is your chance to become Certified as one of the following:
- Certified Welding Inspector (CWI)
- Certified Associate Welding Inspector (CAWI)
- Senior Certified Welding Inspector (SCWI)
- Certified Welding Educator (CWE)
So you want to be a certified welding inspector? If you want to Become Certified Welding Inspector. You Can share your E-mail and Mobile No. in comments. so that i can send you some details of AWS CWI.
Interested Candidates Can write or call Us for More Information
Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com
Please Promote us, forward to your friends circles.....
Thursday 18 June 2015
Q:- GMAW/MAG which of metal transfer deposits multiple droplets of metal across the arc
- Pulsed transfer
- Spray transfer
- Dip transfer
- Globular transfer
Monday 15 June 2015
Q:- E Size and number of tack weld are
- An important consideration
- They are depend on the thickness and base material being welded
- For some material preheat may have to be used
- All of the above
Saturday 13 June 2015
Q:-Solidification cracking occurs:
- In the HAZ
- In the parent metal
- Use low hydrogen electrodes
- All of the above
Tuesday 9 June 2015
Subscribe to:
Posts (Atom)