Q:-The WPS calls for a root gap to be between 2mm and 3mm, the actual measure gap is 4mm what course of action would you take?

• Accept it as its only 1mm
• Reject it
• The welder will decide, if it falls it will be his problem
• Welder insists he can weld the butt joint easily so let him go ahead

AWS -CWI- Seminar/Exam Registration in Mumbai

Dear Welding Professionals,

We are delighted to convey you that Eurotech has announced its AWS-CWI 6 days Training and 1 Day exam course for the Mumbai location. Eurotech is one of the leading welding training providing organizations in India with success rate of 90%. We are the only organization who provides job after the course by uploading your resume on our own job site with 500 consultants.

If anyone looking for lucrative career in welding, then go for AWS – CWI (Certified Welding Inspector) program.

Click Here to Register for Certified Welding Inspector (CWI) Prep Course and Exam In Mumbai

Become A CWI (Certified Welding Inspector). You Can share your E-mail and Mobile no in comments. so that i can send you some details of AWS CWI.

Write or call Us for More Information 
Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com

Q:- Which one of these test would most probably used for welder qualification on a plate butt weld using 13mm low carbon steel

• CTOD 
• Nick break test 
• Fracture fillet test 
• IZOD

Q:- A typical minimum OCV requirement of MMA (111) using basic electrodes would be

• 70 Volts
• 40 Volts
• 100 Volts
• 20 Volts

Q:- Which of these statements are true concerning lamellar tearing

• A hydrogen level increase lamellar tearing which more likely 
• As material thickness increase ductility decease making lamellar tearing more likely 
• Lamellar tearing occur in a HAZ 
• Lamellar tearing effect all type of joints

CWI Training and Certification Seminar Chennai

The special AWS CWI Exam Plus Training and Certification Seminar in Chennai Course shall be organized Eurotech. It's always a good time to learn your welding fundamentals. And Eurotech Learning makes it easy with this CWI Training Course.

This is your chance to become Certified as one of the following:

• Certified Welding Inspector (CWI)
• Certified Associate Welding Inspector (CAWI)
• Senior Certified Welding Inspector (SCWI)
• Certified Welding Educator (CWE)

Click Here To Register for AWS CWI Training Seminar in Chennai

If you want to Become Certified Welding Inspector. You Can share your E-mail and Mobile No. in comments. so that i can send you some details of AWS CWI.


Puneet Sharma | Call : 08196980555 | E-Mail : AWS.CWI.Training@Gmail.Com

We kindly request you all, please Share this post in your friend circles....

Q:- A high level of surface cleaning is important prior to penetrant testing in order to

• The reduce the amount of penetrate used 
• Reduce the level of false identification 
• Ensure a good bound for the developer 
• Improve the viscosity of the penetrate

Q:- A typical min OCV requirement for MMA using either rutile or cellulosic electrode would be

• 40 Volts 
• 120 Volts 
• 100 Volts 
• 50 Volts

AWS CWI Training in Chennai

If You Want to take your welding career to the next level? Now is Your Best Chance. Just attend Our CWI Seminar & Exam in Chennai


If You Really want to Become CWI (Certified Welding Inspector). You Can share your E-mail and Mobile no in comments. so that i can send you some details of AWS CWI.


For More Information Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com
Kindly request you all to Share this post in your friends circles…..

Q:- The main problem with solution treatment of stainless steel is that

• Cnrolling the rate of temperature rise
• Controlling the cooling rate
• Length of the soak period
• High risk of distrotiom

Q:-When welding vertically up with MMA process weaving is sometimes restricted to 2.5 x electrode diameter, this restriction is mainly applied to

• Reduce the overall width of the weld
• Limit the heat input into the joint
• Reduce the no. of electrode in the joint
• Reduce the time require to finish the weld

Q:-With regards to lamellar tearing buttering layer will?

• Improve tougness
• Improve hardness
• Improve ductility

AWS CWI - Official Training Seminar In Chennai

Dear Quality Engineers,

We are delighted to convey you that Eurotech AWS American Welding Society Agent India’s one of the topmost welding training provider has announced its 7 days AWS-CWI (certified Welding Inspector) certification program for the Chennai location.

Those who are interested & want to become Certified Welding Inspector (CWI) and achieve greater heights in welding fields then to do AWS-CWI with Eurotech is the right choice. We are the only certified agent in India who organize course in five different locations with reasonable fees as compare to other training provider of AWS-CWI.

So hurry up! Get register today for the course and fulfill your dreams by becoming a certified welding Inspector.

Interested Candidates Can Drop Their E-mail id and Mobile No. 
For More Information Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com
Kindly request you all to Share this post  in your friends circles.....

Q:-When using multiple SAW arc systems (twin wire etc) the arc after have different polarities are used as AC rather than DC polarity. This is to,

• Prevent the arc blow between the arcs 
• To minimize the productivity 
• To even out the power factoron the main supply 
• Make it easier to initiate the arc

Q:-When using multiple SAW arc systems (twin wire etc) the arc after have difference polarities are used as AC rather then DC polarity. This is to,

• Prevent the arc blow between the arcs 
• To minimize the productivity 
• To even out the power factoron the main supply 
• Make it easier to initiate the arc

AWS CWI Welding Training Course in Ahmedabad

Dear Quality Professionals,

Now is your chance to become certified welding inspector. Just attend our CWI Seminar & Exam in Ahmedabad this month. 

We are delighted to inform you that Eurotech AWS India‘s top welding training provider has announced its 7 days AWS-CWI certification program for Ahmedabad location.

We have been doing this course from the past 6 years and our candidates are scoring above 80% in AWS-CWI in their primary attempt. We are a certified agent of American Welding Society (AWS) for their training and exam in India. If you wish for becoming a certified welding inspector, then go for Eurotech AWS-CWI program.

Interested Candidates Can write or call Us for More Information Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com

Please Promote us, forward to your friends circles..... 

Q:- In a fillet weld fracture test the specimen is broken with

• The fillet weld in tesnsion 
• The fillet weld in compression 
• No specific method need to be adapoted 
• Suitable machining

Q:- A plug weld and a spot weld differ in which h of the following

• A plug weld has a hole in one member 
• A spot weld has a hole in one member 
• A spot weld is an arc weld 
• A plug weld is a friction weld

Q:- Weld decay begins to occure

• Imidetly after the welding
• After post wel heat treatment
• Faster in low carbon grades
• Slower in low carbon grades

CWI Training Exam in Chennai

AWS CWI Training Exam in Chennai

Eurotech has announced its 6 Days Training and 1 day Exam program of AWS-CWI, CAWI, SCWI, CWE certification for the Chennai location.

This is your chance to become Certified as one of the following: 

• Certified Welding Inspector (CWI) 
• Certified Associate Welding Inspector (CAWI) 
• Senior Certified Welding Inspector (SCWI) 
• Certified Welding Educator (CWE)

So you want to be a certified welding inspector? If you want to Become Certified Welding Inspector. You Can share your E-mail and Mobile No. in comments. so that i can send you some details of AWS CWI.

Interested Candidates Can write or call Us for More Information 
Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com 
Please Promote us, forward to your friends circles..... 

Q:- GMAW/MAG which of metal transfer deposits multiple droplets of metal across the arc

• Pulsed transfer 
• Spray transfer 
• Dip transfer 
• Globular transfer

Q:- E Size and number of tack weld are

• An important consideration 
• They are depend on the thickness and base material being welded 
• For some material preheat may have to be used 
• All of the above

Q:-Solidification cracking occurs:

• In the HAZ
• In the parent metal
• Use low hydrogen electrodes
• All of the above

Q:- The surface finish of the charpy impact specimen is:

• Fough 
• Smooth and surface ground 
• Turned ina lathe 
• Surface finish is not important

Q:- Ductile brittle transformation temperature of a welded specimen is affected by:

• Material Composition 
• Welding Heat Input 
• Pre & post Weld Heat Treatments 
• All of the above

Q:- which standard is used for the basic requirement of visual inspection?

• BSEN 17637 
• API 1104 
• BS EN 7079 
• BS EN 4515

AWS CWI Training and Certification Seminar Mumbai

Dear Welding Professionals,

Your Golden chance to Become a Certified Welding Inspector. Eurotech organizing AWS CWI Training and Certification Seminar Mumbai Maharashtra.

Location: Mumbai Maharashtra

Start Date: June 15, 2015
End Date: June 21, 2015

Click Here To Register AWS CWI Certified Welding Inspector Exam and Seminar in Mumbai Maharashtra June 2015

Interested Candidates Can write or call Us for More Information
Puneet Sharma | Call : 08196980555 |  E-Mail : aws.cwi.training@gmail.com
Please Promote us, forward to your friends circles..

Q:- Which one of these joints would be more susceptible to lamellar tearing

• U butt 
• Vee butt 
• Double vee butt 
• Compound weld

Q:- A medium carbon steel weld should be inspected:

• As soon as it is safe to do so
• When the weld is finished
• 48hrs after the completion
• After NDTexamination

Q:- cathodic cleaning is used to remove ?

• Sign waves 
• Oxides 
• Surface inclusions 
• Low melting point compounds

AWS CWI TRAINING SCHEDULE AHMEDABAD 2015

EUROTECH AWS CWI SCHEDULE AHMEDABAD 2015, INDIA
SR.NO	SITE CODE	MONTH	SEMINAR DATES	EXAM DATE	CITY
1	IN44315	JULY	22nd TO 27th JULY	28th JULY	AHMEDABAD
2	IN44815	SEPTEMBER	7th TO 12th SEPT	13th SEPT	AHMEDABAD
3	IN45315	DECEMBER	4th DEC TO 9th DEC	10th DEC	AHMEDABAD

Dear Welding Professionals,

We are delighted to inform you that Eurotech one of the leading welding training providers in India has announce its training schedule of AWS-CWI for Ahmedabad, 2015. We at Eurotech provide 6 days Training and 1 day Exam of AWS-CWI in India.

You can register for the course on Eurotech website 

Click Here To Register AWS CWI Certified welding inspector AHMEDABAD JULY 2015
Click Here To Register  AWS CWI Certified welding inspector AHMEDABAD SEPT 2015
Click Here To Register  AWS CWI Certified welding inspector AHMEDABAD  DEC  2015

You can also write or call us to assist on the below email id and contact no.

 Puneet Sharma | Call : 08196980555 |  E-Mail : aws.cwi.training@gmail.com 

Q:-The welder has increased electrode stick out length of the SAW set, what would be the effect on the weld

• No effect 
• Welding width would be narrow 
• Penetration will be increased 
• Deposition rate would be grater if the wire spec=d rate is also increased

Q:- During root welding, which of the following is true as per lack of root penetration is considered

• The root gap is too large in accordance with WPS 
• Preheat was not used 
• Current is too low 
• Root face is too small

Q:- During root welding, which of the following is true as per lack of root penetration is considered

• The root gap is too large in accordance with WPS 
• Preheat was not used 
• Current is too low 
• Root face is too small

Q:- Hydrogen cracking is considered a cold crack as it will not form until the weld-metal cools to below

• 500 degree C 
• 300 degree C 
• 700 degree C 
• 300 degree F

Q:- In welding procedure transfers joint tensile test the following observation were made. The specimen CSA was recorded as 40mm X 20mm and the max load applied was recorded as ____ . What is the UTS?

237.5KN/mm^2
247.5 N/mm^2
24.5 N/mm^2
237.5 N/mm^2

AWS CWI Training Course in Coimbatore

AWS CWI Training seminar In Coimbatore May 2015

AWS CWI 6 Days Training and 1 day Exam Seminar In Coimbatore May 2015

Dear All Welding Engineers we wish to inform you that your Best chance to Become a Certified Welding Inspector (CWI), Eurotech organizing 6 Day AWS CWI Training Seminar In Coimbatore 

Location: Coimbatore, India 

Start Date: May 25, 2015 

End Date: May 31, 2015 

Interested Candidates Can Contact Us:  Puneet Sharma | Call : 08196980555 | E-Mail : aws.cwi.training@gmail.com 

Please promote us,please forward to your friends circles..

Q:- One the advantages of ultrasonic inspection in relation to radiographic testing to

• Access is generally only required from one side (surface)of the component being tested 
• The designated work area must be closed off by barriers, therefore safety is increased 
• This materials can be easily examined 
• A permanent image of the defect can be obtained

Q:- The purpose of the hot pass is to

• Improve fusion 
• Improve profile 
• Remove hydrogen 
• Remove sulphur

Q:- For the structure termed martensitic to form in a c-mn steel it must first be heated to just below a critical temperature and rapidly cooled

• Just below its lower critical temperature and rapidly cooled 
• A maximum temperature of 550*C then rapidly cooled 
• Above its upper critical temperature and slowly furnace cooled 
• A full transformation to austenite then rapidly cooled

Q:- In replacing intermittent fillet weld, BS EN22553 and AWS2.4 differ in?

• The way in which staggering is structure 
• The plot distance definition 
• Both the above 
• None of the above

Q:- Why is it essential to clean the surrounding parent metal adjacent to the weld metal made by MMA(SMAW)which is to be ultrasonically tested?

• Sound waves will not travel though paint 
• Remove any rust 
• The spatter will impede the contact of the probe and the parent material surface 
• Spatter will reflect the back will echo signal and give spurious indications

Q:- Clustered porosity found internally in the body other open cf an MMA welding is usually associated with

• Poor inter pass cleaning 
• The open circuit current being too high 
• Poor stop/start technique or damp electrode coating 
• Low open circuit voltage

Q:- You find out that contractor have carried out RT as the 10% contractual percentage required by the specification code. The specification also insists that an additional 2 weld, radiographed for every weld that is failed. One of the pipe's spools had an au acceptable defect which the contractor has ignored and radiographed another weld in its place which is acceptable, what would be your course of action be?

1. As long as the other radiograph butt weld is acceptable it's ok, as the 10% condition percentage required by the specification code has been satisfied
2. This is usual practice as 10% NDT is really not important
3. Review the original failed weld and insist they have the additional 2 welds radiographed
4. Review the original have it failed weld and repaired , radiographed , then I would insist that they have an additional 2 weld radiographed

Q:- Some codes require the excess weld metal (weld cap) on cross weld joint tensile specimens to be flush ground, this is because:

• Flushed caps will always break in the weld metal area 
• This is to remove any porosity in the excess weld metal (weld cap) 
• It is easier to calculate the cross section areas of the joint when fused 
• Flushed caps have fuser stress raisers and therefore give a more aqua rate result

Q:- With the DPI method of inspection, after the contact time as elapsed the dye should

• Spraying the surface with the remover till all dye as gone then wipe with a clean cloth 
• Spraying with developer then wiping with a cloth 
• Wipe clean, using lint free cloth soaked in a solvent remover 
• It does not matter how it is done as long as all traces of dye are removed.

Q:- Using DC +ve polarity, what is the typical OCV

1. 40V 
2. 90V 
3. 140V 
4. 240V

AWS CWI TRAINING SCHEDULE NEW DELHI 2015

                       

EUROTECH AWS CWI SCHEDULE Delhi 2015, INDIA
SR.NO	SITE CODE	MONTH	SEMINAR DATES	EXAM DATE	CITY
1	IN44315	FEBUARY	6th TO 11th FEB	12th FEB	Delhi
2	IN44815	MAY	9th TO 14th MAY	15th MAY	Delhi
3	IN45315	AUGUST	14th TO 19th AUGUST	20th AUGUST	Delhi
4	IN45715	NOVEMBER	15th TO 20th JUNE	9th JULY	Delhi

Dear Welding Professionals,

We at Eurotech are delighted to inform you that Eurotech has announced its 6 days Training and 1 Day Exam schedule for 2015 New Delhi location. Anyone who want to achieve greater heights in his welding career, then AWS-CWI certification is the ultimate opportunity in achieving those goals.

You can register for the course on Eurotech website 

1. AWS CWI Certified welding inspector New Delhi May 2015
2. AWS CWI Certified welding inspector New Delhi Aug 2015
3. AWS CWI Certified welding inspector New Delhi Nov 2015

You can also write or call us to assist on the below email id and contact no.

 Puneet Sharma | Call : 08196980555 |  E-Mail : aws.cwi.training@gmail.com  

Q:- Would you consider using a 5mm electrode for vertical up root runs in a 6G (HL045) fixed position pipe?

1. Yes ,it is compatibility 
2. Yes but this would depend upon the welder skill 
3. No, it is not the most suitable electrode coating type 
4. No, the electrode should have been smaller in diameter

What is different between back weld and backing weld?

Q:-What is a typical arc voltage setting when welding with the TIG(GTAW) process?

1. 18-20v 
2. 24-26v 
3. 10-12v 
4. 70-90v

Q:- Asymmetrical weld symbols to EN 22553 are:

1. The same side of the arrow 
2. Different each side of the arrow 
3. Show fillet weld only 
4. Show butt weld only

Q:- Tig perameter setting in plus

1. Peak I can't  
2. Peak frequency  
3. Peak dilation 
4. All of the above

AWS CWI Seminar & Exam In Mumbai

AWS Certified Welding Inspector Course in Mumbai

The American Welding Society CWI Training Seminar and Exam are coming to Mumbai on April 24, 2015 . Provided by Eurotech AWS Agent


This is your chance to take your welding career to the next level.


If you are interested to attend our AWS CWI 6 Day Preparatory Seminar and One day Exam program, you can write or call me to assist you.

Thanks & Regards,

Puneet Sharma

Mobile no. +918196980555

E-mail: aws.cwi.training@gmail.com

Eurotech ACS Pvt. Ltd.

AWS CWI Training Schedule Mumbai 2015

EUROTECH AWS CWI SCHEDULE Mumbai, INDIA
SR.NO	SITE CODE	MONTH	SEMINAR DATES	EXAM DATE	CITY
1	IN44215	JANUARY	16th JAN TO 21st JAN	22nd JAN	Mumbai
2	IN44715	APRIL	24th TO 29th APRIL	30th APRIL	Mumbai
3	IN45015	JUNE	25th TO 30th MAY	21st JUNE	Mumbai
4	IN45115	JULY	15th TO 20th JUNE	9th JULY	Mumbai
5	IN45615	OCTOBER	12th TO 17th OCT	18th OCT	Mumbai

Dear Welding Professionals,  

  

Eurotech India American Welding Society Agent Now Released AWS CWI Certified Welding Inspector Training and certification Preparatory, Seminar & Exam program Schedule in  Mumbai, Maharashtra India 2015  

  

Call : 08196980555 E-Mail : aws.cwi.training@gmail.com , SEO@eurotechworld.net

Basic Metallurgy Courses for Welding & Fabricating Professionals

Eurotech Organizing 2 days "Metallurgy" Course is very beneficial for Welding and Fabrication professionals as it would results in increasing your efficiency. The course objectives are: metals and their properties, to check material test certificate, heat treatment process, Destructive testing, Stainless steel and types, and many more. 

It will definitely increase your learning and your work efficiency and boost your career in welding  

Please do not hesitate to contact me if you require further information Metallurgy" Course 

Best Regards, 

Puneet Sharma 

Email: (aws.cwi.training@gmail.com) 

Mobile no. 08196980555